Filter
Top Products
THS3001 EVM Specifications
1-5
General Information
Note: External factors can significantly affect the overall gain of the EVM. For
example, connecting test equipment with 50-Ω input impedance to the EVM
output will divide the output signal level by a factor of 2 (assuming the output
isolation resistor on the EVM board remains 50 Ω). Similar effects can occur
at the input, depending upon how the input signal sources are configured. The
gain equations given above assume no signal loss in either the input or the
output.
The EVM circuit board is an excellent example of proper board layout for
high-speed amplifier designs and can be used as a guide for user application
board layouts.
1.3 THS3001 EVM Specifications
Supply voltage range, ±V
CC
±5 V to ±15 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Supply current, I
CC
6.5 mA Typ. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input voltage, V
I
±VCC, Max. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output drive, I
O
100 mA, Typ. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Continuous power dissipation at T
A
= 25°C 740 mW. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
For complete THS3001 amplifier IC specifications and parameter
measurement information, and additional application information, see the
THS3001 data sheet, TI Literature Number SLOS217.