Filter
Top Products
18
RQT6301
Basic operations
The radio: preset tuning
There are two methods of presetting stations.
Automatic presetting: The stations the tuner can receive are preset.
Manual presetting: You can select the stations to preset and the order
they are preset in.
There are 39 channels available for presetting.
»
A
Automatic presetting
Do the following once each for FM and AM.
Preparation: Tune to the frequency presetting is to begin at (á page 17).
Hold down [SET].
Release the button when “AUTO MEMORY” appears.
The tuner presets all the stations it can receive into the channels in ascend-
ing order. FM stations are preset into channels 1 to 39, and AM stations are
preset into channels 21 to 39.
“SET OK” is shown when presetting is complete and the last station to be
preset is played.
“ERROR” is displayed if the tuner doesn’t receive any stations. Do preset-
ting manually if this happens (see below).
Note
AM stations replace any FM channels that were preset in channels 21
to 39.
»
B
Manual presetting
Preset the stations one at a time.
1 Tune to the required station.
2 Press [SET].
3 Press [TUNING (X or W)] to select a channel.
4 Press [SET].
The station occupying a channel is erased if another station is preset in that
channel.
»
C
Selecting channels
Preparation: Press [ê] to turn the unit on.
On the remote control
1 Press [TUNER/BAND].
2 Press the numbered buttons to select the
channel.
For channels 1 to 9 press the corresponding number.
For channels 10 or over press [L/-/--], then the two digits.
e.g. To select channel 21: [L/-/--]>[2]>[1]
3 Adjust the volume.
On the main unit
1 Select “PRESET” with [TUNING MODE].
2 Press [TUNING (X or W)] to select the channel.
A
B
C
1
2
3
MHz
?
TUNING
@
SET
SET
SET
2
3
4
TUNER/
BAND
∂
VOLUME
µ
1
23
4
56
7
890
j/-/--
3
2, 4
1
3
2
DIGITAL
S.WOOFER
AV EFFECT
H
SLEEP
CH SELECT
3D AI
PROGRAM
1
23
4
56
7
890
j/-/--
CANCEL
DISC
VCR/AUX/
6CH INPUT
TAPE/
DECK 1/2
SUPER
SOUND EQ
TUNER/
BAND
2/;
¤»
MUTING
45
∂
VOLUME
µ
CD
EQ
U
PRO LOGIC
SUPER SRND
TEST
SETTUNING MODE
Í
Preset channel