Filter
Top Products
Timer Controlled Operation
14
Timer Recording
Recording a broadcast program
1. Connect this unit and stereo system to a commercially
available audio timer.
2. Set the power switches of all components to ON.
3. Load a recordable cassette tape(s) in TAPE I or ll (or both
decks for continuous recording).
4. Set the REV MODE switch to the required position.
Ä: SideA
Ë: SideA ∑ SideB
ä: Continuous Recording
(
TAPE I to TAPE II
)
5. Set the TIMER switch to the REC
position.
6. Tune to the broadcasting station to be
recorded.
7. Press the RECORD button of the deck to
be recorded to set the deck to the record-
pause mode.
8. Adjust the recording level.
9. Set the DOLBY NR switch as required.
10. Set the tape running direction of TAPE l and/or II.
11. Set the audio timer to the required start (power on) and stop
(power off) times. When this setting is completed, the power
to all components will be switched off .
When the preset start time is reached, power will be supplied
and recording will start automatically.
… By using the timer, continuous recording with cassette
tapes loaded in both TAPE I and ll, and the REV MODE
switch in the
ä position, is possible. For continuous
recording, see page 11.
Timer Playback
1. Connect this unit and stereo system to a commercially
available audio timer.
2. Set the power switches of all components to ON.
3. Load a prerecorded cassette tape in TAPE I or ll (or both
decks for continuous playback).
4. Set the REV MODE switch to the required position.
Ä: SideA
Ë: SideA ∑ SideB ∑ Stop
ä: Continuous Playing
(
TAPE I to TAPE II
)
5. Set the TIMER switch to the PLAY position.
6. Set the DOLBY NR switch as desired.
7. Set the tape running direction in which
playback is to start for TAPE I and/or ll.
8. Set the audio timer to the required start
(power on) and stop (power off) times.
When this setting is completed, the power to all components
will be switched off.
When the preset start time is reached, power will be supplied
and playback will start automatically.
Notes:
… When cassette tapes are loaded in both decks with the REV
MODE switch in either
Ä or Ë position, TAPE I will start
playback first because it has priority.
… When cassette tapes are loaded in both decks with the REV
MODE switch in the
ä position, continuous playback is
possible. See page 7.
… Be sure to set the TIMER switch to the OFF position after
timer operation is completed.
W-860R
Amplifier
Audio Timer
AC Power
Tuner
By using this unit with an audio timer, tapes can be recorded or played back at any preset time.
Connection