Teac R-X1 Stereo Receiver User Manual


 
ENGLISH
22 23
Timer 2
Turn the MULTI JOG knob to select a
source (TUNER FM, TUNER AM or
AUX), and then press the TIMER SET
button.
6
Turn the MULTI JOG knob to set the
volume, and then press the TIMER
SET button.
8
“ALARM ON” briefly appears on the
display.
Setting the timer is now completed and
the timer is turned on.
The TIMER indicator ( ) lights on the
display.
If you select FM or AM in step ,
turn the MULTI JOG knob to select a
preset channel, and then press the
TIMER SET button.
67
If the unit is ON, press the
STANDBY/ON button to turn the unit
off (standby).
9
The clock and the TIMER indicator ( )
are displayed.
The unit will turn on and off at the
specified time every day.
<
The TIMER indicator blinks during timer
playback.
Don’t forget to turn the unit off
(standby), or the timer won’t work.
< If you select AUX, proceed to step .
8
To turn on or off the timer
When you don’t use the timer, press the
TIMER button to turn it off. (The TIMER
indicator disappears from the display.)
Press the TIMER button again to turn it
on.
Turn the MULTI JOG knob to set the
stop time (minute), and then press
the TIMER SET button.
5
Turn the MULTI JOG knob to set the
stop time (hour), and then press the
TIMER SET button.
4
The “minutes” value starts blinking.
To check the timer setting
Press the TIMER SET button repeatedly to
check your timer setting.
< To exit the checking mode, leave the unit
idle for 20 seconds.