Teac PD-H600 Stereo Receiver User Manual


 
13
ENGLISH
Note
< It takes a few seconds to load a disc. No buttons work during
loading. Wait until the total number of the tracks and/or the total
play time of the disc are displayed.
< Playback stops automatically after all the tracks/files are played.
< “No Disc“ appears on the display when no disc is loaded in the
unit.
< MP3/WMA files recorded out of folders are recognized as the
contents of “ROOT“ folder. Playback starts from the first file of the
“ROOT” folder.
< If there are folders that has no MP3/WMA file, this unit skips them.
A
To stop playback
Press the stop button (H).
< To start playback again, press the play/pause button (G/J).
Playback starts from the first track/file.
B
To pause playback
Press the play/pause button (G/J).
J” appears on the display.
< To resume playback, press the play/pause button (G/J) again.
C
To open or close the disc tray
Press the open/close button (L).
< When you press the open/close button (L) during playback,
playback stops and the disc tray opens.
< After ejecting the disc, press the open/close button (L) again to
close the disc tray.
D
To skip to the next or a previous track/file
Press the skip buttons (.//).
The selected track/file is played from the beginning.
< When playback is stopped or paused, press the skip buttons
(.//) repeatedly until the track/file you want to listen to is
found. Then press the play/pause button (G/J).
< When the skip button (.) is pressed during playback, the
current track is played from the beginning. To return to the
beginning of the previous track, press the skip button (.)
twice.
< During programmed playback, playback skips to the next or
previous track in the program.
E
To search for a part of a track/file
During playback, hold down the skip buttons (.//) until
the part you want to listen to is found.
< On the remote control unit, hold down the search buttons
(m/,).
< Playback stops when the searching reaches the end of the last
track/file.