Filter
Top Products
21 | MP-10
If the player is operating by the power source of AC/DC adap-
tor, while the rechargeable batteries are kept inside the battery
compartment, switch off the player by pressing the Stop but-
ton. Leave the player idle for about 60 sec., the batteries will be
recharged automatically.
The recharging will be cut off automatically when the batteries
are fully recharged. The LCD shows the recharging status or the
cut off status.
Recharging status Recharging cut off status
Remarks:
The batteries will be recharged only when the player is at
the off (idle) status. If the Play/Pause button is pressed dur-
ing recharging, the player will perform playback function
and the recharging will be interrupted.
GENERAL OPERATIONS
1. Insert the disc into the player and close the lid securely.
2. Connect the LCD line remote control unit to the player, and
the earphone to the LCD line remote control unit.
3. Press and hold the Play/Pause button for one second, the
player scans the disc and then starts playing.