Filter
Top Products
19 | MP-10
1 External battery connec-
tion
2 DC input socket
3 Lid open switch
4 "Next" button
5 "Previous" button
6. Play / Pause button
7 Stop button
8 Volume up button Vol +
9 Volume down button Vol -
10 Audio out socket
11 Remote control &
earphone socket
12 LCD display
13 ESP On / Off andDirectory
/ file level button (DIR/ESP)
14 Equalizer preset button
(EQ)
15. Earphone socket
16 Mode button
17 Hold function On / Off
switch
18 Navigational search
button (NAV)
POWER SOURCES
Using Nickel-metal-hydride batteries:
1. Open the lid of the player and open the battery compart-
ment door. Insert two pieces of the Nickel-metal-hydride bat-
tery following the polarity as indicated on the unit, and close
the battery compartment door.
2. Do not mix using new battery with old battery.
3. Batteries should be recharged or replaced when the battery
level indicator on the LCD display shows empty continuously.
4. When the batteries are fully discharged, the battery level in-
dicator will blink for about 5 seconds and the unit will be shut
off automatically.