Teac MP-10 CD Player User Manual


 
20 | MP-10
Remark: To remove the Nickel-metal-hydride batteries from
the battery compartment, press the negative pole of the
battery downward. The positive pole of the battery will be
tilted up and the battery can be taken out easily.
Using AC/DC adaptor
Use only DC output between 4.5V and 6.0V with positive pole to
the center pin, and make sure that the AC input voltage of the
adaptor matches with the domestic supply. Any other adaptor
may cause damage to the unit.
Remark:
Stop the player before connect (or disconnect) the adap-
tor DC jack to the player.
Using external battery case (supply for some models only)
Insert two pcs of AA (UM-3/R06) size battery into the battery
case (optional accessory) following the polarity as indicated.
Then close the battery case. Plug the jack of the battery case
to the external battery connection socket of the player.
To recharge the Nickel-metal-hydride rechargeable
batteries
Switch off the player with the Stop button and connect the AC/
DC adaptor to the player. The rechargeable batteries inside the
battery compartment will be recharged automatically.
PUSH