Filter
Top Products
27
Setting the Clock
If the power switch of the subwoofer turned off, the
settings kept in memory (clock, preset stations, timer
setting) will be erased.
If the unit is on, press the STANDBY/ON switch to turn
it standby
1
Press the TIME SET button once more.
The “hour” value blinks.
3
Press the SKIP button (.//) to set the current
hour.
4
Press the TIME SET button.
The “minute” value blinks.
5
Press the SKIP button (.//) to set the current
minute.
6
Press the TIME SET button.
The clock starts.
7
TIME SET
STANDBY/ON
Press and hold down the TIME SET button.
2
“12 HOUR” or “24 HOUR” blinks. If you want to change the
hour mode, press the
.or/ button.
< If no button is pressed for 10 seconds, the time setting mode
will be cancelled.
B
A
C
E
DD
F
6
Connection
CAUTION
< Turn off the power of all the equipment before making connections.
< Read instructions of each component you intend to use with this unit.
< Be sure to insert each plug securely. To prevent hum and noise, do not bundle the connection
cords with the power cord.
Speaker (R) Speaker (L)
Side panel of the main unit
Subwoofer