Filter
Top Products
6
FRONT PANEL
POWER &
MEMORY CARD
Electronic POWER switch
»Easy touch«
Turn on the unit with a single
light touch. To turn off the unit
you must press and hold
down the POWER key
approx. 3 seconds until the
display reads “D22”.
PCMCIA MEMORY CARD
Copy presets to/from a
standard memory card.
CARD TYPES
S-RAM Type 1 PCMCIA
cards, with a minimum of
64KB and a maximum of
2MB memory.
LED INDICATORS
LEVEL
Shows the Input or
Output level for left and
right channels.
Select Input or Output
metering in Utility.
OVERFLOW
Indicates excessive
Input level or internal
DSP owerflow.
SAMPLE RATE
Indicates at which external
Sample Rate the unit is
locked to when set to
Sync In or Wordclock.
Flashing LEDs indicates
“no lock”.
DI LOCK
Digital Lock Indicator.
GPI
Incoming pulse detection.
REMOTE IN
Indicates incoming
Serial Remote Data.
EDITED
Indicates that the current
preset has been edited.
TAP KEY
Tap the desired Delay time.
Instant (destructive) or Preview
(non-destructive) mode can be
selected in the Utility menu.
Key LED red:
Indicates Instant mode is used
Key LED green:
Indicates Preview mode is selected.
NUDGE KEYS
Increases or decreases the
Delay time in increments specified in
the Utility menu.
ADJUST WHEEL - DELAY SECTION
Increases or decreases the Delay time
in increments specified in the Utility
menu.