Filter
Top Products
TASCAM MD-02/MD-02B 11
TOC
This appears when the most recent U-TOC information
has not yet been recorded to the disc and blinks during
U-TOC recording.
Track number display area
The track number that is selected or being played is
shown.
MD record mode indicators (LP2, LP4, MONO)
These show the recording mode. No indicator appears
when in stereo mode. During playback, the record
mode used for the MD being played back is shown.
Counter display area
The elapsed time or remaining time is shown. The
REMAIN indicator appears when the remaining time
is shown. The counter shows minutes (3 digits) and
seconds (2 digits).
Level meters
These show the playback level or record input level.
A.TRACK
This indicator appears when the auto track function is
ON.
When recording or in recording standby, this blinks
if the auto track function is set to “Time” (causing the
unit to automatically create new tracks at set intervals
of time when recording).
REPEAT
This indicator appears when the repeat playback mode
is ON.
SYNC
This indicator appears when the sync recording mode is
ON.
REC
This indicator appears when recording or in recording
standby.
OPTICAL
This indicator appears when the input source is set to
OPTICAL (digital).
COAXIAL
This indicator appears when the input source is set to
COAXIAL (digital)
ANALOG
This indicator appears when the input source is set
to UNBALANCED (analog), and blinks when set to
BALANCED (analog, MD-02B only)
SINGLE
This indicator appears when in single repeat mode.
RANDOM
This indicator appears when set to random playback
mode.
¥
This indicator appears during playback and when
recording.
π
This indicator appears when in record or playback
standby (paused).
DISC, GROUP, TRACK indicators
The “DISC” indicator appears when a disc is loaded,
but playback is stopped.
The “GROUP” indicator appears when group mode is
ON.
The “TRACK” indicator appears during playback or in
playback standby.
Character display area
This area shows disc and track information, menus,
messages operation status and other information.
This indicator appears when the power-on play function
is ON and blinks when the power-on play function is
ON, but no disc is loaded.
, CAPS
During title input, the “katakana” or “CAPS” indicator
appears when one of these character modes is in use.
Nothing appears when lower case letters are in use.
PROGRAM
This indicator appears when set to program playback
mode.
Display
2 − Names and Functions of Parts