Filter
Top Products
10 TASCAM MD-02/MD-02B
ANALOG IN L/R (UNBALANCED)
These analog line input jacks (RCA pin jacks) have a
nominal input level of –10 dBV.
ANALOG OUT L/R (UNBALANCED)
These analog line output jacks (RCA pin jacks) have a
nominal output level of –10 dBV.
These output the selected input signal during recording,
when in recording standby and when monitoring.
DIGITAL IN (COAXIAL)
This coaxial digital input jack conforms to IEC60958-3
(S/PDIF).
Since this deck has a sampling rate converter, in
addition to 44.1 KHz signals, 32 and 48 KHz digital
signals can also be input.
DIGITAL OUT (COAXIAL)
This coaxial digital output jack conforms to
IEC60958-3 (S/PDIF).
This outputs the selected input signal during recording,
when in recording standby and when monitoring. When
a digital input is selected, that digital input is output
unchanged.
DIGITAL IN (OPTICAL)
This optical digital input jack conforms to IEC60958-3
(S/PDIF). Since this deck has a sampling rate converter,
in addition to 44.1 kHz signals, 32 and 48 kHz digital
signals can also be input.
DIGITAL OUT (OPTICAL)
This optical digital output jack conforms to
IEC60958-3 (S/PDIF).
This outputs the selected input signal during recording,
when in recording standby and when monitoring. When
a digital input is selected, that digital input is output
unchanged.
ANALOG INPUT (BALANCED) (MD-02B only)
These analog input jacks (balanced XLR) have a
nominal input level of +4 dBu.
(1: GND, 2: HOT, 3: COLD)
ANALOG OUTPUT (BALANCED) (MD-02B only)
These analog output jacks (balanced XLR) have a
nominal output level of +4 dBu.
(1: GND, 2: HOT, 3: COLD)
These output the selected input signal during recording,
when in recording standby and when monitoring.
~ IN connector
Connect the included power cord.
Rear panel
MD-02
MD-02B
2 − Names and Functions of Parts