Tascam CD-01UPro CD Player User Manual


 
By using an external timer, you can set the CD-
01U/CD-01U Pro to play the loaded disc automatically
when the unit is turned on by the timer.
1 First, plug the power cord of the CD-01U/CD-01U
Pro into the power outlet of the timer.
2 Load a CD into the unit.
3 Set the TIMER menu (menu number 07 TIMER) to on.
4 Set the timer to the desired time.
Consult the timer's operation manual for details.
At the set time, the power to the CD-01U/CD-01U Pro
will be turned on, and playback will automatically begin.
Both analog and digital output can be set to mono out-
put mode.
Set the mono output mode on and off on the menu
(menu number 08 MONO).
When the this function is on, MONO indicator is lit on
the display.
Even when the power is turned off, this setting is main-
tained.
The Intro Check function allows only the beginning of
each track to be played for 10 seconds.
This function is operational both at stop and during nor-
mal playback.
1 Press the STOP/INTRO CHECK key on the front
panel when SHIFT indicator is lit and playback stops.
Or, pressing the INTRO CHECK key on the remote
control to turn the intro check function on and off.
Int is shown on the display.
2 Press the ¥?π key on the front panel or ¥key on
the remote control.
This function works in normal (continuous) play mode
and program play mode.
To exit the intro check mode, press ª key on either the
front panel or remote control, or INTRO CHECK key on
the remote control.
The intro check mode is also canceled when play mode
is changed.
Intro Check
Output in monaural
Power on play
Pitch control
7 - Advanced operations
20 TASCAM CD-01U/CD-01UPro
When playing back an audio CD or MP3, the pitch (or
speed) of the playback can be varied.
Pitch can be varied +/- 12.5%.
1 Press the PITCH knob on the front panel when
SHIFT indicator is unlit or press the PITCH key on
the remote control to turn the Pitch Control function
on and off.
When the pitch control function is activated, pitch
value is shown on the display and PITCH indicator
lights.
2 Rotate the PITCH knob or use the PITCH +/- keys to
set the pitch.
Use the PITCH menu (menu number 12 PITCH) to
adjust the pitch control steps from 0.1, 0.5, or 1.0%
(Default: 0.1%).
Digital output provides the 44.1KHz digital signals con-
stantly even if pitch control is activated.