Tascam CD-160MK CD Player User Manual


 
TASCAM CD-160MKll 7
1 − Introduction
Never use a stabilizer or printable discs
Using commercially available CD stabilizers or printable
recordable discs with this player will damage the mecha-
nism and cause it to malfunction.
NOTE
Never use a disc that has had a stabilizer mounted to
it. The residual adhesive may cause the disc to stick
to the turntable of the CD-160MKll. If it sticks to the
turntable, you will need a technician to get it out.
Beware of condensation
If the unit (or a compact disc) is moved from a cold to a
warm place, or used after a sudden temperature change,
there is a danger of condensation; vapor in the air could
condense on the internal mechanism, making correct oper-
ation impossible. To prevent this, or if this occurs, let the
player sit for one or two hours at the new room temperature
before using.
Do not open the sealed cabinet as this might result in
damage to the circuitry or electrical shocks. If a foreign
object should get inside the unit, contact your supplier
or service agency.
When removing the power plug from the wall outlet,
always pull directory on the plug, never yank the cord.
To keep the laser pickup clean, do not touch it and
always close the disc tray.
As the disc rotates at high speed during playback, do not
lift or move the unit. Doing so may damage the disc or
the laser assembly.
The voltage selector on the rear panel is only available
on units for the North American market. Please set this
to match your local supply. If you are in any doubt in
this matter, consult an electrician.
NOTE
When transporting the unit, always use the origi-
nal packing materials. For this reason, we strongly
recommend that you save all the packing materials
that came with the CD-160MKII, in case you need to
transport it in the future.
In addition, when transporting the unit, you should
tape the disc tray closed, using an adhesive tape
that will not spoil the finish of the unit.
About discs
Conventional audio CDs bearing the COMPACT DISC
DIGITAL AUDIO logo on the label:
Properly finalized CD-R and CD-RW discs.
NOTE
Depending on the quality of the disc and/or the
condition of the recording, some CD-R/CD-RW discs
may not be playable.
Copy-protected discs and other discs that do not
conform to the CD standard may not play back cor
-
rectly in this player. If you use such discs in this unit,
TEAC Corporation and its subsidiaries cannot be
responsible for any consequences or guarantee the
quality of reproduction. If you experience problems
with such non-standard discs, you should contact
the producers of the disc.