Tannoy 12 Speaker User Manual


 
C M Y CM MY CY CMY K
28
14.3 : SECUR ET - VMB WALL MOUNTING BRACKET
FIG 1.
The VMB is wall mounting bracket for the attachment of a VMY,
available in both black and white finishes, allowing the user secure
the Tannoy VNET“ Full range loudspeaker in either portrait or
landscape orientations to a wall.
The Tannoy VNET“ loudspeaker is attached to the bracket using
the accessories supplied.
This wall-mounting bracket has a larger wall plate than previous
models to maximise the integrity of fixing obtained. There are also
two holes either side of the fixing beam to allow the speaker cable
the pass through the wall plate and along the fixing beam to the
terminal panel resulting in a more discrete installation.
The fixing beam on the VMB has a number of mounting points from
which the VMY, V12Y & V15Y can be attached at varying distances
from the mounting surface.
Only the screws, fasteners, shakeproof and plain
washers specified on figure 3. should be used to
assemble the VMB bracket
.
FIG 2.
Number on Fig 3. Description Quantity
1 VMB Wall Bracket 1
2 M10 Nyloc Nut 1
3 M10 Plain Washer 1
4 30mm Square Blank Plug 1
5 Nylon Spacer 1
6 M10 x 85mm Screw 1