Filter
Top Products
SECUR ET – VMY Yoke Bracket
The VMY is an adjustable yoke bracket (available in both black and white), allowing the user to fly
the Tannoy V12HP loudspeaker in either portrait or landscape orientations using the same bracket
(Figures 1 & 2).
The Tannoy V12HP loudspeaker is attached to the bracket using the M10 bolts and washers
supplied in the accessory pack.
Only the screws, fasteners, shakeproof and plain washers specified on figure 3. should be used to
assemble the VMY bracket
Pivot studs (Figure 3.) (Supplied with the VMY) are attached to the cabinet using the M10 bolts
supplied. These bolts locate on the M10 inserts in the cabinet. The VMY adjustable yoke bracket then
connects to the centre of these mounting plates (using the M10 screws supplied). These bracket pick
up points which are in line with the bracket’s axis of rotation, are also positioned on the centre of
gravity of the V12HP in both orientations to allow easy adjustment for optimum coverage.
The vertical distance between the apex of the VMY and the top of the Tannoy V12HP loudspeaker
can be adjusted by connecting to varying mounting points on the bracket allowing varying degrees
of vertical rotation. The top centre fixing hole of the VMY then provides a pick up point for a variety
of Tannoy Professional hardware accessories including the VMB wall mounting plate (shown in
Figure 2.), the VCS ceiling saddle, and the VPC pole clamp.
Use the table of parts along with the assembly drawing (Figure 3.) to assemble the VMY.
Figure 4 shows the VMY assembled.
Fig.1 Fig. 2
!