Filter
Top Products
13.2 Passive System Parameters (optional)
With the vast array of digital loudspeaker management systems available it is inevitable that the user
may opt to use a controller other than the TX2 & TDX2 as part of a large scale integrated system. In
passive mode the V12HP has been designed to need no external equalisation to overcome system
limitations. If the V12HP is to be used alone with additional bass enhancement required and have
the frequency response limits tighter than +/- 3dB as stated in section 11, then apply the
parameters in the table below for optimised performance:-
Parameter Unit/Name
Gain (dB) User definable
Delay (ms) User definable
Polarity Positive
HPF
Ä
Freq (Hz) 42.5
Slope (dB/oct) 24
Filter Shape Butterworth
LPF Freq (Hz) Thru
Slope (dB/oct) NA
Filter Shape NA
Freq (Hz) 62.5
Level (dB) +7
Type Parametric
PEQ 1 Ä
Q / Bandwidth 2.5 / 0.3969
Freq (Hz) 680
Level (dB) -3.5
Type Parametric
PEQ 2
Q / Bandwidth 1 / 1.000
Freq (Hz) 1410
Level (dB) -1
Type Parametric
PEQ 3
Q / Bandwidth 4 / 0.2500
Freq (Hz) 7130
Level (dB) -2
Type Parametric
PEQ 4
Q / Bandwidth 2 / 0.500
Freq (Hz) NA
Level (dB) NA
Type NA
PEQ 5
Q / Bandwidth NA
Ä
Note : When using the V12HP with subs, set HPF @ 80 – 110Hz
(24dB/oct LR) and omit PEQ1.
PEQ 1 may also be omitted when using the V12HP as a floor monitor.