Filter
Top Products
Tandberg Data Glossary of Terms
34 Tandberg LTO HH Installation and User Manual
SCAM
SCSI Configured AutoMagically. A SCSI protocol that assigns automatically
SCSI-IDs to SCAM capable devices such as the Tandberg LTO HH tape
drives when you boot the system.
SCSI
Small Computer Signaling Interface. The Tandberg LTO HH utilizes the
SCSI Ultra320 interface which allows for a transfer rate of up to 320 MB/s on
the bus.
SCSI-ID
A unique identifier assigned to SCSI devices that enables them to
communicate with a computer when they are attached to a host adapter
via the SCSI-bus. Each SCSI host adapter board has eight available SCSI-
IDs with numbers 0 through 7 (or 0 through 15 for Wide SCSI
adapters). Usually the host adapter itself is assigned SCSI-ID 7.
SLDC™
Streaming Lossless Data Compression. The hardware data compression
method specified as the standard for the two Ultrum tape formats and
thus used with the Tandberg 200LTO, LTO-2 HH tape drives.
Ultra/Ultra2
16-bit WIDE SCSI/LVD interface used with SLR7, 24, 40, 50, 60,
75, 100 and 140 tape drives.