Tandberg Data LTO-3 HH Cassette Player User Manual


 
Tandberg Data Software Installation
22 Tandberg LTO HH Installation and User Manual
2. Double-click on Storage Manager.
The list of available tape device(s) appears on the screen.
3. Follow the instructions on the screen to continue
Note:
For any questions related to this application or its installation, please refer to the IBM online
documentation
.
5.6 HP/UX
5.6.1 Tape Drive Installation
To install the Tandberg LTO HH tape drives, use the SAM utility.
1. Login as root.
2. Run SAM.
3. Select Peripheral Devices.
4. Select Action/Add.
The Tandberg LTO HH is automatically detected and the necessary drivers installed.
5.6.2 HP/UX System Command
TAR, CPIO and DD allow simple Backup, Verify or Restore operations to be performed.
Two different device drivers can be used:
A Non Rewind device driver (used to perform append backup)
A Rewind device driver (used only to perform overwrite backup)
Tar command examples:
tar cvf /dev/rmt0 /etc performs the backup of the /etc directory
tar tvf /dev/rmt0 reads the data on the tape
tar xvf /dev/rmt0 restores the data from the tape to the current directory tree
For a complete explanation on how to use the system commands, please refer to the HPUX
documentation, or the online help. (MAN command).