Sunfire TGA-5200 Stereo Amplifier User Manual


 
User's Manual
11
Speaker-level audio outputs
From: Ampli er outputs
To: Speaker input posts
Balanced line-level audio signals
From: Preampli er XLR outputs
To: Ampli er XLR inputs
Sun re Theater Grand Processor TGP-5
12 VDC Trigger signal
From: Preampli er trigger
outputs
To: Ampli er trigger
inputs
CHAPTER 2
Balanced Connections
If your preampli er has XLR outputs, it can be connected to the XLR inputs as shown. This example shows the connec-
tions to the Sun re Theater Grand Processor TGP-5. This also shows the Current Source output connections to the front
left and right speaker inputs. (The Voltage Source outputs can be used instead, as shown on the previous page.)
The 12 VDC trigger connection
shown can be used to turn the ampli-
er on when the preampli er turns on.
Alternatively, you could use the ampli-
er's AUTO-ON switch. The ampli er
will then automatically turn on when a
preamp audio signal is received.
MINIMUM SPEAKER LOAD IMPEDANCE 4 OHMS
DVD IN
SAT IN
HDMI OUT
MANUFACTURED UNDER
LICENSE
FROM DIGITAL THEATER
SYSTEMS, INC. US PAT. NO. 5,451,
942, 5,956,674, 5,974,380,
5,978,762 AND OTHER WORLD-W
IDE PATENTS ISSUED AND
PENDING. "DTS", "
DTS-ES EXTENDED SURROUND" AND
"NEO:6" ARE TRA
DEMARKS OF DIGITAL THEAT
ER
SYSTEMS, INC. COPYRIGHT 1996, 20
00, DIGITAL THEATER
SYSTEMS, INC. ALL RIGHTS RESERVED.
MA
NUFACTURED U
NDER LICENSE
FROM DOLBY LABORATORIES.
"DOLBY", "PRO-LOGIC" AND THE
DOUBLE-D SYMBOL ARE
TRADEMA
RKS OF D
OLB
Y
LABORATORIES.
+
+
+
+
+
LOUDSPEAKERS
R
RS
C
LS
L
C
RS
R
RS
LS
SW
R
LS
C
L
L