Sunfire SRS210W-G Speaker User Manual


 
User's Manual
Installation overview
The cabinet may be mounted vertically
between wall studs. The width is ideal for
tting between vertical 2x4 studs, spaced
16 inches apart. It may also be tted
horizontally.
A cardboard debris shield is supplied
to ll the front aperture and prevent any
dust, paint, or debris from entering during
installation and sheetrock nishing.
Strips of foam material are supplied to
t between the cabinet and the studs and
sheetrock.
The cabinet should be rmly and
permanently joined to the studwork and
sheetrock using woodscrews and glue.
The woofer bafe assembly is screwed
to the front of the cabinet once the sheet-
rock is in place. A grille frame and grille
are added to nish the installation. A paint
shield is supplied so that you can easily
paint the grille at the same time as the
walls are painted.
Unpacking
Two people are required to gently lift out
the cabinet and the bafe assembly from
their shipping boxes. Remove all the
packing material.
Your Sunre subwoofer should reach
you in perfect condition. If you do notice
any shipping damage, please contact
Sunre immediately. Make sure that you
keep your sales receipt. It is the only way
to establish the duration of your Limited
Warranty and it may come in useful for
insurance purposes.
The serial number for the SubRosa
subwoofer is printed on the front label of
the woofer assembly.
Contents of each package
SRS–210W-C cabinet
Cabinet assembly
Dimensions 44.50" x 14.25" x 3.5"
1,130.3 mm x 362 mm x 88.9 mm
Weight 23.30 lb (10.6 kg)
Debris shield
12 foam strips 1" x 5"
8 foam strips 1" x 8"
Plastic rivets for debris shield
12 wood screws
SRS–210W-B bafe assembly
Bafe assembly
Dimensions 26.75" x 11.75" x 3.25"
679.5 mm x 298.5 mm x 82.6 mm
Weight 29 lb (13.2 kg)
14 Allen head screws and washers
(8-32 x 1.25")
SRS–210W-G grill assembly
Grille frame
Dimensions 28.80" x 13.8" x 0.7"
731.5 mm x 350.5 mm x 17.78 mm
(includes drywall spacer)
Weight 2.00 lb (0.9 kg)
Grille
Dimensions 26.5" x 11.5" x 0.75"
673.1 mm x 292.1 mm 19.1 mm
Weight 0.6 lb (0.27 kg)
Paint shield
12 Allen head screws
SRA–2700EQ amplier
SubRosa amplier
Dimensions 1.75" (1U) x 17" x 15"
44.5 mm x 431.8 mm x 381 mm
Weight 18.4 lb. (8.35 kg)
Room measurement microphone
with stand and cord
AC power cord
2 rack-mount brackets
Introduction
5