Sunfire CRW-3 Speaker User Manual


 
User's Manual
8
The CRW series loudspeakers are de-
signed to be a perfect sound compliment
to at panel displays. The CRW-3C cen-
ter loudspeaker can be mounted above
or below the display, and the CRW-3 can
be mounted at either side.
The following details show various sys-
tems incorporating the loudspeakers, with
a subwoofer to handle the low frequency
range.
As with all loudspeaker installation,
check that the position does not
interfere with the picture quality.
Ideally, all of the surround loudspeak-
ers in a home theater system should
be of the same make and model, and
positioned at similar heights to produce a
smooth and continuous soundeld. The
Cinema Ribbon Duos (CRM-2) use the
same drivers and ribbons as the CRW
series, making them perfect for rear
channel applications. Alternatively, you
could use CRW-3 loudspeakers.
Front Left/Right Speakers
The front left and right CRW-3
loudspeakers should be positioned so
that your TV display is exactly centered
between them. This will help focus your
attention towards the display.
Your left loudspeaker should be set
exactly the same distance and angle
away from your listening position as the
right loudspeaker.
If you have a smaller TV, the loud-
speakers should be no more than two
feet away from the sides of the display.
Loudspeaker Location
Front left and right loudspeakers
Center line
of display
Display
CRW-3CRW-3
CRW-3C
(above or below display)