Filter
Top Products
Description
1. PLAY Indicator: The play indicator will glow when the unit is in play mode.
2. PAUSE Indicator: The pause indicator will glow when the unit is in pause mode.
3. CUE Indicator: This indicator will glow when the unit is in CUE mode and will flash every time a new CUE point is set.
4. TOUCH Indicator: This appears when a hand touches the jog wheel.
5. FOLDER Dispaly: This indicator which folder you are in.
6. Character Display: This will display the name of the track and album when a MP3 track is loaded.
7. BPM Meter: This meter will display the BPM’s of the current track.
AUTO BPM: This will indicate that the AUTO BPM counter is active.
8. MEMORY Bucket: This indicator serves two functions. The bucket outline details the cue memory status; a full bucket
outline indicates the cue memory is full. The five bars in the memory bucket detail the digital buffer. Each bar indicates 2
seconds. The search functions will not operate until all the bars are full.
9. CD/USB Indicator: This indicates which port is active. Use the source button to select your desired port.
10. TEMPO Lock: This will indicate the TEMPO lock function is active.
11. PITCH Indicator: This meter will display the pitch percentage applied by the pitch slider.
12. TIME Bar Indicator: This bar gives a visual approximation of a track’s or disc’s time. This bar will begin to flash when a
track is ending.
13. TIME Meter: These indicators will detail the current Minutes, Seconds, and Frames. The meter will display either the
elapse, total, or remaining time of a track or the entire disc. The display time will depend on the selected time function.
The selected time function will be displayed above the TIME METER as total remaining, remaining track time, or elapsed
track name.
14. REMAIN/ELASPED Indicator: When REMAIN is shown in the VFD display the time meter will show the current track's
remaining time. When ELAPSED is shown in the VFD display the time meter will show the current track's elapsed time.
15. TRACK Display: This indicator describes which track is currently cued or is playing.
16. SINGLE Indicator: This indicates that the track is in single play mode; the track will play once and return to CUE mode. If
the single indicator is not on, the unit is in continuous mode.
17. RELOOP Indicator: Appears when LOOP is engaged or ready to be engaged.
18. AUTO CUE: This will indicate if the Auto Cue is on or off. Press and hold the SGL/CTN for 1 sec. to turn the Auto Cue
function on and off.
12