Solid State Logic DUENDE Stereo Equalizer User Manual


 
Duende User Guide
Page 9 of 29
5. Operational Overview
Once your Duende hardware and software has been properly installed, Duende plug-ins are
accessed and used just like any host-based plug-in. You can run Duende plug-ins simultaneously
with your other host based plug-ins in any combination.
All Duende plug-ins support up to 40bit 96kHz operation. Please note that Duende plug-ins use
twice as much DSP resources at 96kHz.
Duende parameters are changed by dragging, rotating or clicking knobs and buttons, whose
behavior varies slightly depending on which software is being used to host the plug-ins. Generally
the further away the mouse pointer is from the knob, the more resolution is available for
parameter adjustment.
When the mouse cursor is hovered over a knob it’s value is displayed in the appropriate units. At
any point you can see exactly what value a knob has without touching it. If you have a mouse with
scroll wheel, it can be used to change the knob position.
OS X:
To reset a knob to its default value hold 'COMMAND' whilst clicking on that knob.
For very fine adjustment, hold 'SHIFT' whilst dragging.
Windows XP:
To reset a knob to its default value hold 'CTRL' whilst clicking on that knob.
Every Duende plug-in parameter can be automated so long as parameter automation is supported
by the host application. The method for recording and editing automation varies from host to host.
For specific instructions on using automation with the host consult the host application
documentation.