Filter
Top Products
A time limited trial version of X-EQ will be installed during
the Duende V2.2 software update. This allows X-EQ to be run
in evaluation mode, which means the plug-in can be used with
full functionality until a certain number of samples of audio
have been processed. At 48kHz this gives approximately 10
hours of continuous use for either stereo or mono plug-ins. At
the point where 10 minutes of the evaluation period remains,
the countdown timer will turn red. Once the timer reaches ‘0h
0m 0s’ the sample count has been reached and the plug-in will
cease to process audio.
If you wish to continue using X-EQ after this period, you can
purchase the full version from http://solid-state-
logic.locotalk.com. Once the authorisation procedure has been
completed, you will have an unrestricted version of X-EQ.
To obtain an authorised version of X-EQ please do the
following:
1. Navigate to http://solid-state-logic.locotalk.com
and log
in to your SSL account. If you do not already have an
account, please create one.
2. Under the ‘SSL Products and Admin’ section, proceed
to the Online Shop.
3. Add X-EQ to your cart and confirm your identity in the
next step.
4. In step 3 you will be asked to enter your Authentication
ID. This is found in the X-EQ Production Activation
box. Command + click (Mac) or Ctrl + click (PC) on
the Duende logo in the X-EQ GUI to open this box.
5. If your Duende hardware is not already registered you
will be asked to register it here.
6. Enter your payment details, your order will be
completed and you will be provided with the
Unlock Key.
7. Return to the Product Activation box and enter the
Unlock Key – X-EQ is now authorised for unlimited
use.
Please note that X-EQ will only run on the particular
Duende hardware for which it is authorised
Authentication ID Unlock Key
5
3. Installation & Authorisation