Filter
Top Products
6
Rear Panel/Connections
RETURN CHANNELS 5 TO 8
These connectors provide the balanced RETURN signal from stereo channels
5 to 8 for connection to processor outputs. The numbers on the cables corre-
spond to the Router channels as follows:
Cable No. Return Channel Switch Position
1 Return 5 Left
2 Return 5 Right
3 Return 6 Left
4 Return 6 Right
5 Return 7 Left
6 Return 7 Right
7 Return 8 Left
8 Return 8 Right
STEREO OUTPUTS
These connectors provide the balanced return signal from channels 1 to 8
according to the switch positions for connection of active speakers or other
monitoring systems. The level is controlled by the LINE OUT pot. If FIXED
mode is activated (switch depressed), the return signals are passed 1:1 to the
STEREO OUTPUTS.
PHONES OUT
This stereo connector provides the same signal as the front-panel headphones
output. Its level is also controlled by the VOLUME pot on the front panel. You
can connect two headphones at a time (see page 8, PHONES OUT).
AC
For connection of the Router to AC power using the included power cord.
}
5
}
6
}
7
}
8