Filter
Top Products
SPIRITMAN060104
Entempo
5
• Soft copy of SPIRIT Manual and Quick Start Guide
• Drivers for Windows 98SE
• Registration form
1.6. Installation of Spirit Device on your computer
Power on the SPIRIT and connect the SPIRIT to your PC using the USB cable
provided. Launch Windows Explorer on the PC, and click on the “My Computer”
folder. Windows will automatically recognise the SPIRIT as a removable storage
device available to Windows. The SPIRIT will be allocated a drive letter (as with the
existing storage devices on your PC) and will be listed among the other storage
devices. You can treat this drive like any other system drive. Windows supports the
full range of file handling functions including: drag and drop, copy, paste and delete.
You can organize the drive space by creating folders and sub folders, as you require.
For Win98 users, please install the device driver from the CD. Insert CD. DO NOT
CONNECT THE DEVICE TO THE COMPUTER YET
Start >>>>>>Control Panel >>>>>>Add Hardware
Choose installation location and point to the Driver Folder on the CD-ROM
Windows will install the software.
Connect device and reboot computer. ‘My Computer’ will assign a letter for the new
drive.
1.6.1. WAV, MP3 and WMA formats
The SPIRIT supports WAV files, for low bit rate voice recording, by the device and two
compressed music file formats: MP3 and WMA. The SPIRIT will play files in either file
format automatically. MP3 and WMA extensions denote that these are compressed
files. The WAV format typically denotes the extension on a CD or hard drive in
UNCOMPRESSED format.
The SPIRIT is shipped with a few tracks loaded on the HDD. Your choice of format
and compression standard will affect the quality of the music and the corresponding
file size.
NOTE: WAV, MP3 and WMA are Music files.
1.6.2. Managing Music with Windows Media
TM
Player
With Windows Media
TM
Player installed on your PC, you can either build a library of
music files on your PC by “ripping” your audio CD collection or by transferring already
encoded MP3 or WMA files from your PC directly. (If you do not have Windows Media
TM
Player installed on your PC, load the copy supplied with the SPIRIT CD. Follow the
installation instructions, which will automatically be presented when the CD is installed
in the drive.)
To load music from the PC, connect the SPIRIT to the PC using the USB cable
provided. The USB socket is on the bottom edge of the SPIRIT. Select the Windows
Media
TM
Application on your PC and follow the Application instructions for the transfer
of files.