Spirit PLAYER CD Player User Manual


 
SPIRITMAN060104
Entempo
13
Auto-Tuning
Your player will attempt to automatically tune and preset 10 different stations upon
entering the Tuner mode the first time. The auto-tuning function will stop once all 10
presets are populated. If you would like to interrupt the auto-tuning process, pressing
the "Select" or "Menu" button once will stop it and take you back up to the Radio
menu. Press "Select" again to re-enter Tuner mode. If you would like the device to
automatically do the preset again, pressing the "Skip Back" and "Skip Forward"
buttons simultaneously will trigger the auto-tuning function.
Tuner: Adjusting the Radio
Tuner allows you to move through the FM radio frequencies using the “Navigate Up
and the “Navigate Down” buttons. Stopping at any, point will play the radio station on
that FM frequency.
Tuner: Adjusting the Radio
You can manually tune the FM radio frequencies in increments of 100kHz using the
Navigate Up” and “Navigate Down” buttons. Stopping at any point will play the radio
station on that FM frequency. However, a long press using the "Navigate Up" or
"Navigate Down" button will cause the Tuner to search up or down the station.
Tuner allows you to move through the FM radio frequencies using the “Navigate Up
and the “Navigate Down” button. Stopping at any, point will play the radio station on
that FM frequency.
Setting Presets
Once you are tuned to the station of your choice, by using the “Navigate Up” and the
“Navigate Down” buttons, pressing and holding the “Select” button will add that FM
stations frequency to the preset on the player. The preset is shown as “P01” …
“P10”
NOTE: If you would like to change the station assigned to a particular Preset, select
the Preset and adjust to the new frequency. Once you are tuned to the right station,
pressing and holding the "Select" button will replace the old station with the current
station that you are listening.
Selecting Presets
Tuner allows you to move through the preset of FM radio frequencies. Using the
Skip Forward” and the “Skip Back” buttons will move you through the presets
already stored on the SPIRIT.
Record
To record from an FM station, press “Play” to begin recording while listening to the
station. Press "Play" again to stop recording and to start saving the recording to the
drive.
Listening to FM Recordings
After you have recorded the music of the station of your choice, you can choose to
listen to the recordings by going to the RECORDINGS sub menu. The recording files
are named in an ascending manner. Thus, the latest recordings will be at the bottom
of the list.