Filter
Top Products
This is the Internet version of the user’s guide © Print only for private use.
20To connect your headset manually to the dongle,
press the small key on the back of the dongle
momentarily.
Note: A longer press will put the dongle into the
pairing state.
Master reset
Make sure that no headset that can be paired is placed
near to the dongle. Press and hold the small key on the
dongle until you can see the blue light flashing once,
then release. Remove the dongle from the USB port.
USB dongle functions
Blue light:
• Fast flashing – searching for a paired headset.
• Slow flashing – searching for a headset to pair with.
Key function:
• Press momentarily – searching mode (fast flashing)
• Press and hold down – pairing mode (slow flashing)