Filter
Top Products
This is the Internet version of the user’s guide © Print only for private use.
19
3. Make sure that you can view the blue LED
on the front of the USB dongle.
4. Place the headset close to the USB dongle.
5. If you see a fast flashing blue light on the dongle,
wait until it has stopped.
6. Press the small key on the dongle and hold it down until
you can see the blue light flashing once, then release it.
The blue light will now start flashing slowly, indicating
that the dongle is searching for a Bluetooth headset in
pairing mode.
7. Pairing is completed when the blue light stops flashing.
It can take up to 1 minute until the pairing is completed.
How to connect your headset with the USB dongle
The moment you connect the USB Bluetooth dongle
to a USB port it will start searching for the paired
Bluetooth headset. This is indicated by the flashing blue
light on the dongle. If the headset is found, the blue light
will be turned off.