Filter
Top Products
VGP-XL1B User Guide 23
Loading & Unloading Discs
Loading the VGP-XL1B Changer/Recorder
Before you load discs into the VGP-XL1B Changer/Recorder for
the first time, please do the following:
1 Make sure the Changer/Recorder is properly connected to the host
computer and is turned on.
2 Make sure the system is connected to the Internet and the Internet
connection is working properly.
3 Start Media Center Setup and verify that the correct options were
selected during setup. From the main menu, select Tasks
Settings | General | Windows Media Center Setup | Run Setup
Again.
4 Select Yes when asked, “Do you want Media Center to
automatically connect to the Internet to get this information?”
5 Select Yes when asked, “Do you have an always on Internet
connection?”, if this is so.
Once you have completed this procedure, continue with loading
discs into the Changer/Recorder.
To load a single disc
•Press the Load button once and insert the disc in the open slot
of the optical drive located on the front panel.
To load multiple discs
• Press the Load button twice and insert each disc in the open
slot of the optical drive one at a time. The Changer/Recorder
carousal keeps rotating open slots to the drive until all slots are
filled or until no disc is inserted after 15 seconds.
Note: When loading discs, make sure that the label is facing to the
right of the slot.