Sony TMR-BT8IP Headphones User Manual


 
TMR-BT8iP [GB,FR,DE,ES] 3-279-360-12(1)
20
GB
TMR-BT8iP [GB,FR,DE,ES] 3-279-360-12(1)
Symptom Cause / Remedy
Distorted sound

Turn down the volume of the Bluetooth receiving
device to the point where the sound is no longer
distorted. For details on volume adjustment, refer
to the operating instructions supplied with the
Bluetooth receiving device.

Turn o the EQ of iPod.

Ensure that this unit is not receiving interference
from a wireless LAN, other 2.4 GHz wireless device,
or microwave oven.
Sound break,
noise or playback
speed change

If a device that generates electromagnetic radiation,
such as a wireless LAN, other Bluetooth device(s),
or a microwave oven is nearby, move away from
such sources.

Remove any obstacle between this unit and other
Bluetooth device or move away from the obstacle.

Locate this unit and other Bluetooth device(s) as
near as possible.

Re-position or re-orient this unit.

Re-position or re-orient other Bluetooth device.
Pairing cannot be
established.

Locate this unit and other Bluetooth device(s) as
near as possible.

Check if you input correct passcode (page 11).
Bluetooth
connection cannot
be established
with a device that
has been “paired”
before.

Locate this unit and other Bluetooth device(s) as
near as possible.

is unit tries to connect with either of the last
two devices recognized before. If this unit cannot
establish the Bluetooth connection with a paired
device, operate the connecting procedures on the
Bluetooth receiving device or pair the device again.

Pairing information may be deleted. Pair the device
again.