Filter
Top Products
TMR-BT8iP [GB,FR,DE,ES] 3-279-360-12(1)
TMR-BT8iP [GB,FR,DE,ES] 3-279-360-12(1)
11
GB
Press and hold the POWER button of the bluetooth receiving
device for 7 seconds or more to standby for pairing while the
unit is turned o.
Notes
Passcode* of this unit is xed at “0000”, “1234” or “8888.” Depending on the
Bluetooth receiving device, it may be necessary to input the passcode (in this
case, “0000”, “1234” or “8888”). is unit cannot be paired with a Bluetooth
receiving device whose passcode is not “0000”, “1234” or “8888.”
If the Bluetooth receiving device requires a passcode, input “0000.”
* Passcode may be called “Passkey,” “PIN code,” “PIN number,” or “Password.”
5
Press
and hold the power button of this unit for more than about 7
seconds to enter “Pairing in process.”
Aer about 1 second, the indicator will ash twice but keep
pressing the power button.
Notes
When rst power on this unit aer initialize, this unit will enter the “Pairing
in process” automatically.
e pairing information is initialized if you press and hold the power button
for 15 seconds. e indicator lights up for 5 seconds before the initialization
starts. Release the button immediately when the indicator lights up.
When the indicator of this unit ashes quickly, stop pressing it.
is unit enters “Pairing in process.”
is unit’s indicator status will vary as follows, and pairing is
established with the Bluetooth receiving device.
Continued