Sony TMR-BT8IP Headphones User Manual


 
TMR-BT8iP [GB,FR,DE,ES] 3-279-360-12(1)
14
GB
TMR-BT8iP [GB,FR,DE,ES] 3-279-360-12(1)
Listening to music
Bluetooth Connecting / Playing back
You can listen to music of the iPod connected to this unit on the
Bluetooth receiving device (headset, etc.).
Before starting operation, complete pairing this unit and the
Bluetooth receiving device (page 10).
1
The Bluetooth receiving device is on standby for connection.
2
Connect this unit to the iPod then turn on the iPod and start
playback on the iPod.
is unit’s indicator status will vary as follows, and the Bluetooth
connection between this unit and the Bluetooth receiving device
is established.
Indicator ashes twice: Power is on
Indicator ashes (at about 1-second intervals): Connecting
in process
Indicator ashes twice slowly (at about 5-second intervals):
Connected
(Playback will start automatically)
If the Bluetooth connection is not established within 5 minutes*,
this unit automatically turns itself o. In this case, turn it on
again by pressing and holding the power button for about
1 second.
* iPod backlight may turn on in this 5 minutes.
Notes
If the Bluetooth connection cannot be established with the device paired
already, try pairing again.
If playback cannot start automatically, try start playback on iPod.
If you press and hold the power button on this unit for about 1 second, this
unit will connect to the iPod and start playback automatically.