Filter
Top Products
Additional Information
17
GB
Specifications
System
Recording system
4-track 2-channel stereo
Fast-winding time (approx.)
100 sec. (with Sony C-60 cassette)
Bias
AC bias
Signal-to-noise ratio (at peak level and weighted with Dolby NR off)
Type I tape, Sony Type I (NORMAL): 55 dB
Type II tape, Sony Type II (HIGH): 57 dB
Type IV tape, Sony Type IV (METAL): 58 dB
S/N ratio improvement (approximate values)
With Dolby B NR on: 5 dB at 1 kHz, 10 dB at 5 kHz
With Dolby C NR on: 15 dB at 500 Hz, 20 dB at 1 kHz
Harmonic distortion
0.4% (with Type I tape, Sony Type I (NORMAL):
160 nWb/m 315 Hz, 3rd H.D.)
1.8% (with Type IV tape, Sony Type IV (METAL):
250 nWb/m 315 Hz, 3rd H.D.)
Frequency response (Dolby NR off)
Tape type
Type I tape, Sony Type I
(NORMAL)
30 – 15,000 Hz (±3 dB, IEC),
20 – 16,000 Hz (±6 dB)
Type II tape, Sony Type II
(HIGH)
30 – 16,000 Hz (±3 dB, IEC),
20 – 17,000 Hz (±6 dB)
Type IV tape, Sony Type IV
(METAL)
30 – 18,000 Hz (±3 dB, IEC),
20 – 19,000 Hz (±6 dB),
30 – 13,000 Hz (±3 dB, –4 dB
recording)
Inputs
Line inputs (phono jacks)
Sensitivity: 0.16 V
Input impedance: 47 kilohms
Outputs
Line outputs (phono jacks)
Rated output level: 0.5 V at a load impedance of
47 kilohms
Load impedance: Over 10 kilohms
Headphones (stereo phone jack)
Output level: 0.25 mW at a load impedance of
32 ohms
General
Power requirements
Europe and certain countries in Asia: 220 – 230 V AC, 50/
60 Hz
Australia: 240 V AC, 50/60 Hz
Other countries: 110 – 120/220 – 240 V AC, 50/60 Hz
Power consumption
TC-RE340: 15 W
TC-KE240: 14 W
Dimensions (approx.) (w/h/d)
430 × 120 × 290 mm
Mass (approx.)
3.3 kg
Supplied accessories
See page 4.
Optional accessory
Remote commander RM-J910/J710
For more information on the availability of the remote
commander, contact your nearest Sony dealer.
Design and specifications are subject to change without notice.
Wow and flutter
±0.15% W. Peak (IEC)
0.1% W. RMS (NAB)
±0.2% W. Peak (DIN)