Filter
Top Products
Basic Operations
9
EN
Basic Operations
Recording
1
3
PROTECTION
PHONES
SPEAKERS
A
BASS
•
OFF
A
+
B
–
10
+
10
TREBLETONE
•
–
10
+
10
BALANCE
LOUDNESS TAPE MONITOR
Ø ON ø OFF
SUBSONIC
PHONOTUNERCDAUXTAPE2/MDTAPE1/DAT
INPUT SELECTOR
VOLUME
SOURCE
DIRECT
EON LINK
010
Ø ON ø OFF
•
LEFT RIGHT
B
g
POWER
SOURCE
TAPE1
TAPE2
4
Prepare the recording component for recording, then start
recording.
5
Start playing the programme source.
Set INPUT SELECTOR to
Source connected to:
—TAPE1/DAT
—TAPE2/MD
z You can record the same
source on two recording
components at the same
time
z You can monitor the
recorded sound (Tape
Monitor function) (TA-
FE910R/FE710R/FE610R/
FE510R only)
You can monitor the
recorded sound if the tape
deck you are recording on
has separate playback and
recording heads.
To monitor the sound, set
TAPE MONITOR to TAPE1
or TAPE2 (TA-FE910R/
FE710R only) or press
TAPE1 MONITOR (TA-
FE610R/FE510R only).
Note that on the TA-
FE610R/FE510R, you can
monitor the only sound
being recorded from the
TAPE1/DAT jacks.
1
Press POWER to turn on the amplifier.
2
Turn on the programme source you want to record.
3
Select the programme source that you want to record by
turning INPUT SELECTOR.
The indicator for the programme source lights up.
TAPE1/DAT
TAPE2/MD
To record a
PHONO
TUNER
CD
Radio broadcast
Compact disc
Record
AUX (unavailable on the TA-
FE210)
Source connected to AUX