Sony ST-SE300 Stereo System User Manual


 
2
GB
WARNING
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
To avoid electrical shock, do not open
the cabinet. Refer servicing to qualified
personnel only.
Precautions
On safety
Should any liquid or solid object fall
into the unit, unplug the unit and
have the unit checked by qualified
personnel before operating it any
further.
On power sources
Before operating the unit, be sure that
the operating voltage of your unit is
identical with that of your local
power supply.
Unplug the unit from the wall outlet
if it is not to be used for an extended
period of time. To disconnect the
cord, pull it out by grasping the plug.
Never pull the cord itself.
AC power cord must be changed only
at the qualified service shop.
On placement
Place the unit in a location with
adequate ventilation to prevent heat
buildup and prolong the life of its
components.
Do not place the unit near heat
sources, or in a place subject to direct
sunlight, excessive dust or
mechanical shock.
Do not place anything on top of the
cabinet which might block the
ventilation holes and cause
malfunctions.
Do not install the appliance in a
confined space, such as a bookcase or
built-in cabinet.
On cleaning the cabinet
Clean the cabinet, panels and controls
with a soft cloth lightly moistened
with a mild detergent solution. Do
not use any type of abrasive pad,
scouring powder or solvent such as
alcohol or benzine.
On repacking
Do not throw away the carton and the
packing material. This makes an
ideal container when transporting the
unit. When shipping the unit, repack
it as it was packed at the factory.
If you have any question or problem
concerning your unit that is not covered
in this manual, please consult your
nearest Sony dealer.