Filter
Top Products
MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
About Auto Calibration
Auto Calibration allows you to perform automatic calibration as follows.
Check the connection between each speaker and the receiver.
Adjust the speaker level.
Measure the distance of each speaker from your seating position. (*1)
Measure the speaker size. (*1)
Measure the frequency characteristics (EQ). (*1)
Measure the frequency characteristics (Phase). (*1, *2)
*1
The measurement result is not utilized when [2ch Analog Direct] is selected.
*2
The measurement result may be not utilized, depending on the audio formats.
Note
The D.C.A.C. is designed to achieve proper sound balance for your room. However, you can adjust the speaker
levels manually according to your preference using [Test Tone].
Related Topic
Outputting a test tone from each speaker (Test Tone)
Notes on use
4-488-938-11(1)
Copyright 2014 Sony Corporation
Help Guide
361