Filter
Top Products
19
GB
D:\NORM'S JOB\SONY HA\SO0173\STR-DH130\4294472111_GB\GB04CON_STR-DH130-
U2.fm
masterpage: Right
STR-DH130
4-294-472-11(1)
Preparing the Receiver
Selecting the speaker
system
You can select the speakers you want to drive,
if you have connected the speakers to
SPEAKERS
A and B terminals.
Be sure to use the buttons on the receiver to
perform this operation.
Press SPEAKERS (OFF/A/B/A+B)
repeatedly to select the speaker
system you want to drive.
To turn off the speaker output
Press SPEAKERS (OFF/A/B/A+B)
repeatedly until the “SP A” and “SP B”
indicators on the display do not light up.
Note
You cannot switch the speaker system by pressing
SPEAKERS (OFF/A/B/A+B) when the headphones
are connected.
Adjusting the tone
You can adjust the tonal quality of the
speakers.
Press TREBLE + or TREBLE –
repeatedly to adjust the treble
level.
Press BASS + or BASS –
repeatedly to adjust the bass level.
You can adjust from –10 dB to +10 dB in 1 dB
step.
The initial setting is 0 dB.
To select Light up
The speakers connected to the
SPEAKERS A terminals
SP A
The speakers connected to the
SPEAKERS B terminals
SP B
The speakers connected to both the
SPEAKERS A and B terminals
(parallel connection)
SP A
SP B
SPEAKERS (OFF/A/B/A+B)
TREBLE
+/–
BASS
+/–