Filter
Top Products
13
GB
Location of Parts and Basic Amplifier Operations
(continued)
PHONES jack
Connects headphones.
Note
To use the headphones, set the SPEAKERS selector to OFF
to output sound to the headphones.
8 DISPLAY button
Press repeatedly to change the information on the
display window as follows:
When a component other than tuner is selected
v
When the tuner is selected
v
*
Index name appears only when you have assigned one to the
component or the preset station (see page 25).
**
These indications appear only during RDS reception (see page
18).
9 Use the following buttons to enjoy surround sound.
For details, see “Enjoying Surround Sound”
starting from page 21.
SOUND FIELD ON/OFF button
Press to turn the sound field on or off.
SOUND FIELD MODE +/– button
Press to select a sound field from the group you
selected.
0 TONE button
Press to turn the tone effect on or off. The TONE
indicator lights up while the tone effect is turned
on.
Note that if you have adjusted the tone using the
MENU </> and +/– buttons, the adjusted tone will
be produced whenever you turn on the tone effect.
BASS BOOST button
Press to increase the bass of the front speakers. The
BASS BOOST indicator lights up when the function
is turned on.
!¡ TONE indicator
Lights up while the tone effect is turned on.
BASS BOOST indicator
Lights up while the bass boost is turned on.
When you want to enjoy high quality sound
Do the procedure below to bypass the sound control
circuits.
1 Set SOUND FIELD ON/OFF to off.
2 Set TONE to off.
3 Set BASS BOOST to off.
The result will be a two-channel stereo sound output
from the front speakers that is highly faithful to the
programme source.
Index name of the component*
v
Selected component
v
Sound field applied to the component
Index name of the preset station* or
programme station name**
v
Frequency
v
Programme type indication**
v
Radio text**
v
Current time**
v
Sound field applied to the band or the preset
station