Filter
Top Products
22
Dolby Surround Setup
Dolby Digital (AC-3)
(STR-DE1015G only)
To obtain the best possible surround sound, first
specify the type of speakers you have connected Then
use the test tone to adjust the speaker volumes to the
same level.
Specifying the speaker type
1 Click SETUP in the main menu.
2 Click SPEAKER.
3 Set the speaker size parameters according to the
type of speakers you connected.
Front speaker (FRONT)
• If you connect large speakers that will effectively
reproduce bass frequencies, select “LARGE”.
• If you cannot obtain sufficient surround effects when
playing a Dolby Digital (AC-3) source (a source for which
the DISCRETE indicator lights), select “SMALL”. The bass
frequencies for the front speakers will be output from the
sub woofer or other “LARGE” speakers.
Center speaker (CENTER)
• If you connect a large speaker that will effectively
reproduce bass frequencies, select “LARGE”.
• If you cannot obtain sufficient surround effects when
playing a Dolby Digital (AC-3) source (a source for which
the DISCRETE indicator lights), select “SMALL”. The bass
frequencies for the center speaker will be output from the
sub woofer or other “LARGE” speakers.
• If you do not connect the center speaker, select “NO”.
Rear speaker (REAR)
• If you connect large speakers that will effectively
reproduce bass frequencies, select “LARGE”.
• If you cannot obtain sufficient surround effects when
playing a Dolby Digital (AC-3) source (a source for which
the DISCRETE indicator lights), select “SMALL”. The bass
frequencies for the rear speakers will be output from the
sub woofer or other “LARGE” speakers.
• If you do not connect rear speakers, select “NO”.
Rear speaker place (REAR)
This parameter lets you specify the location of your rear
speakers for proper implementation of the Digital Cinema
Sound VIRTUAL REAR SHIFT and VIRTUAL MULTI REAR
modes. Refer to the illustration below.
• Set to SIDE if the location of your rear speakers
corresponds to section A.
• Set to BEHIND if the location of your rear speakers
corresponds to section B.
This setting effects only the VIRTUAL REAR SHIFT and
VIRTUAL MULTI REAR modes.
This parameter does not appear when the rear speaker
parameter is set to “NO”.
Sub woofer (WOOFER)
• If you connect a sub woofer, select “YES” to output the
LFE (low frequency extension) channel from the sub
woofer.
• If you do not connect a sub woofer, select “NO”. This
activates the Dolby Digital (AC-3) bass redirection
circuitry and outputs the LFE signals from other speakers.
• In order to take full advantage of the Dolby Digital (AC-3)
bass redirection circuitry, we recommend setting the sub
woofer’s cut off frequency as high as possible.
DELAY
TV FUNC
CD
IR
TUNER
USER IR
EXIT
SET
SET
INDEX
INDEX
INDEX
AUTO START SLEEP TIMER
OSD SETUP
MACRO PLAY
SPEAKER
FUNCTION SOUND SETUP
INPUT MODE
90°
20°
A
B
45°
B
A
SPEAKER SETUP
FRONT
LARGE
EXITRETURN
CENTER
LARGE
REAR
LARGE
WOOFER
p
p
p
p
YES
SIDE