Filter
Top Products
25
US
Additional Information
Specifications
Amplifier section
Power output
Stereo mode
Surround mode
and 5.1 CH/DVD
(Reference)
Frequency
response
Canada model:
(8 ohms 20 Hz - 20 kHz,
less than 0.09% total
harmonic distortion)
100 W + 100 W
Australia, Singapore,
Malaysia and other
countries models:
Rated power: (8 ohms at
1 kHz, THD 0.7%)
100 W + 100 W
Reference power: (8 ohms
20 Hz - 20 kHz, less
than 0.09% total
harmonic distortion)
95 W + 95 W
Canada model:
(8 ohms at 1 kHz, THD
0.8%)
Front: 100 W/ch
Center*: (ProLogic mode)
100 W
Rear*: 100 W/ch
Australia, Singapore,
Malaysia and other
countries models:
Rated power: (8 ohms at 1
kHz, THD 0.7%)
Front: 100 W/ch
Center*: (ProLogic mode)
100 W
Rear*: 100 W/ch
Reference power: (8 ohms
20 Hz - 20 kHz, less
than 0.09% total
harmonic distortion)
Front: 95 W/ch
Center*: (ProLogic mode)
95 W
Rear*: 95 W/ch
RMS power: (8 ohms at
1 kHz, THD 10%)
Front: 135 W/ch
Center*: (ProLogic mode)
135 W
Rear*: 135 W/ch
PHONO: RIAA
equalization curve
±0.5 dB
(STR-DE535 only)
TV/SAT (TV/LD), CD,
MD/TAPE, VIDEO,
5.1 CH/DVD:
10 Hz - 50 kHz ±1 dB
Video section
Antenna
Intermediate
frequency
Usable sensitivity
S/N
Harmonic
distortion
Selectivity
Inputs
Output
System
Power
requirements
Power
consumption
Loop antenna
450 kHz
50 dB/m (at 999 kHz)
54 dB (at 50 mV/m)
0.5 % (50 mV/m, 400 Hz)
At 9 kHz: 35 dB
At 10 kHz: 40 dB
VIDEO, TV/SAT (TV/
LD), 5.1 CH/DVD:
1 Vp-p 75 ohms
VIDEO, MONITOR:
1 Vp-p 75 ohms
Tuner section: PLL
quartz-locked digital
synthesizer system
Preamplifier section:
Low-noise NF type
equalizer
Power amplifier section:
Pure-complementary
SEPP
Canada model:
120 V AC, 60 Hz
Australia model:
240 V AC, 50 Hz
Singapore and Malaysia
models:
230 V AC, 50/60 Hz
Other countries:
120/220/240 V AC,
50/60 Hz
Canada Model:
300 VA
Australia, Singapore and
Malaysia models:
195 W
Other countries models:
245 W
General
Inputs
Outputs
Muting
BASS BOOST
TONE
Tuning range
Antenna terminals
Intermediate
frequency
Sensitivity
Usable sensitivity
S/N
Harmonic
distortion at
1 kHz
Separation
Frequency
response
Selectivity
Tuning range
+0.5
–2
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
AM tuner section
MD/TAPE REC OUT:
Voltage: 250 mV,
Impedance: 10 kilohms
VIDEO AUDIO OUT:
Voltage: 250 mV,
Impedance: 10 kilohms
WOOFER:
Voltage: 2 V
Impedance: 1 kilohms
PHONES: Accepts low
and high impedance
headphones
Full mute
+8 dB at 70 Hz
±8 dB at 100 Hz and
10 kHz
87.5 - 108.0 MHz
75 ohms, unbalanced
10.7 MHz
Mono: 18.3 dBf, 4.5 µV
Stereo: 38.3 dBf, 45 µV
11.2 dBf, 1 µV (IHF)
Mono: 76 dB
Stereo: 70 dB
Mono: 0.3 %
Stereo: 0.5 %
45 dB at 1 kHz
30 Hz - 15 kHz dB
60 dB at 400 kHz
Australia, Singapore and
Malaysia models:
531 - 1602 kHz (9 kHz
step)
Canada model:
530 - 1710 kHz (10 kHz
step)
531 - 1710 kHz (9 kHz
step)
Other countries models:
530 - 1610 kHz (10 kHz
step)
531 - 1602 kHz (9 kHz
step)
You can change the AM tuning interval to
10 kHz (except Australia, Singapore and
Malaysia model). After tuning in any AM
station, turn off the receiver. Hold down the
PRESET TUNING + button and press the
1/u (power) button. All preset stations will
be erased when you change the interval. To
reset the interval to 9 kHz, repeat the same
procedure.
Impedance
50
kilohms
50
kilohms
S/N
86 dB
96 dB
PHONO
(STR-DE535
only)
CD, 5.1 CH/
DVD, MD/
TAPE, TV/
SAT (TV/
LD), VIDEO
Sensitivity
4 mV
250 mV
(continued)