Filter
Top Products
52
Other Operations
Selecting the command mode of the
remote
Lets you select the command mode of the remote. Change
the command mode when you use 2 Sony receivers in the
same room. The default setting is “AV1”. For details, see
“Selecting the mode of the remote” on page 65.
1 Press SET UP.
2 Press the cursor buttons ( or ) to select
“COMMAND MODE”.
3 Turn the jog dial to select “AV1” or “AV2”.
Selecting the color of the on-screen
display (STR-DE975 only)
Select the color of the on-screen display. You can
select either “COLOR” or “MONOCHROME”. The
default setting is “COLOR”.
1 Press SET UP.
2 Press the cursor buttons ( or ) to select “OSD”.
3 Turn the jog dial to select “COLOR” or
“MONOCHROME”.
OSD horizontal position (STR-DE975 only)
This parameter lets you adjust the position of the
on-screen display horizontally. The default setting is “4”.
1 Press SET UP.
2 Press the cursor buttons ( or ) to select “OSD
H. POSITION”.
3 Turn the jog dial to select 0-64.
OSD vertical position (STR-DE975 only)
This parameter lets you adjust the position of the
on-screen display vertically. The default setting is “4”.
1 Press SET UP.
2 Press the cursor buttons ( or ) to select “OSD
V. POSITION”.
3 Turn the jog dial to select 0-32.
Adjustment Using the SET UP Button