Filter
Top Products
11
Receiver Operations
Recording
This receiver makes it easy to record to and from the
components connected to the receiver. You don’t have
to connect playback and recording components
directly: once you select a program source on the
receiver, you can record and edit as you normally
would using the controls on each component.
Before you begin, make sure you’ve connected all
components properly.
ç: Audio signal flow
Recording on an audio tape, MiniDisc or
video tape
You can record audio on a cassette tape, MiniDisc or
video tape using the receiver. See the instruction
manual of your tape deck, MD recorder or VCR if you
need help.
1 Press one of the function buttons to select the
program source.
2 Set the component to be ready for playing.
For example, insert a CD into the CD player.
3 Insert a blank tape or disc into the recording deck
and adjust the recording level, if necessary.
4 Start recording on the recording deck and then
start playing the component.
Playback component
(program source)
Recording component
(Tape deck, MD recorder,
VCR)
Function buttons
ç
ç