Filter
Top Products
Setting Up60
Recording the sound from the connected
components
1 Insert a recordable MD.
2 Press LINE/LINE LEVEL on the top panel to
display “LINE”.
3 Press REC.
The player stands by for recording.
4 Press MD ^.
Recording starts.
5 Play the optional component connected to the
LINE IN jack of the player.
If the volume of the component connected to the
LINE IN jack is too high
Press LINE/LINE LEVEL to display “Level: High”
(“Level: Normal” under the normal conditions ) or
reduce the volume of the connected component.
Tip
If there is no sound
input for more than 2
seconds during
recording, a track mark
is stamped
automatically.
Connecting optional components (continued)