Filter
Top Products
The Timer26
Waking up to music (continued)
4 Set the timer to the hour and the minutes you want
the music to go on.
1 Press TUNE TIME SET
+ or – to set the hour
and press ENTER
MEMORY.
2 Press TUNE TIME SET + or – to set the minutes,
and press ENTER MEMORY.
5 Set the timer to the hour and the minutes you want
the music to go off. (Do as step 4.)
6 Press TUNE TIME SET + or – to set the volume
you want, and press ENTER MEMORY.
7 Press STANDBY.
The indication lights up and the power goes off;
the player enters the standby mode.
At the preset time, the power will go on and music
will play. Then the power will go off at the preset
time, and the player will enter the standby mode
again.
To check/change the waking up timer settings
Press TIMER, then ENTER MEMORY. Each time you
press ENTER MEMORY, a stored setting is displayed
in the set order. To change the setting, display the
setting you want to change and re-enter it.
To use the player before a timer playback starts
If you turn on the player, you can use it as usual ( in
case of the radio, if you listen to the station which is
different from the one you tuned in step 1 on page 25,
you will hear that station at the preset time.) Turn off
the player before the preset time.
Tips
• To exit the standby
mode, press STANDBY
to make the
indication disappear.
• The preset settings
remain until you reset
them.