Filter
Top Products
Basic Operations12
Recording on a tape (continued)
Tips
• Adjusting the volume or
the audio emphasis
(page 22) will not affect
the recording level.
• When or is
displayed, recording
will be made on both
sides of the tape. To
record on one side, press
DIR MODE to display
.
• If the AM radio makes a
whistling sound after
you’ve pressed z/X in
step 3, press MODE to
select the position that
most decreases the
noise.
Note
When you start
recording using CD
DUBBING, you cannot
set the player in pause.
Use these buttons for additional operations
To Press
stop recording x on the tape section
pause recording z/X
Press the button again to
resume recording.
turn on/off the player POWER
To erase a recording, proceed as follows:
1 Insert a tape you want to erase its recording into the tape
deck and press x on the tape section.
2 On the player: press z/X and then N.
On the remote: While keeping z/X pressed, press
TAPE N.
x
DIR MODE
MODE
POWER
n,
N
z/X