Filter
Top Products
Additional Information
47
US
HT-6600DP 4-244-560-11(1) US
AM tuner section
Tuning range
Models of area code U, CA
With 10-kHz tuning scale: 530 – 1710 kHz
4)
With 9-kHz tuning scale: 531 – 1710 kHz
4)
Antenna Loop antenna
Intermediate Frequency
450 kHz
Usable sensitivity 50 dB/m (at 1,000 kHz or
999 kHz)
S/N 54 dB (at 50 mV/m)
Harmonic distortion 0.5 % (50 mV/m, 400 Hz)
Selectivity
At 9 kHz: 35 dB
At 10 kHz: 40 dB
4) You can change the AM tuning scale to 9 kHz or
10 kHz. After tuning in any AM station, turn off
the receiver. Hold down PRESET TUNING + and
press ?/1. All preset stations will be erased when
you change the tuning scale. To reset the scale to
10 kHz (or 9 kHz), repeat the procedure.
Video section
Inputs
Video: 1 Vp-p, 75 ohms
S-video: Y: 1 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
Component Video:
Y: 1 Vp-p, 75 ohms
PB/B-Y: 0.7 Vp-p, 75 ohms
P
R
/R-Y: 0.7 Vp-p, 75 ohms
Outputs
Video: 1 Vp-p, 75 ohms
S-video: Y: 1 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
Component Video:
Y: 1 Vp-p, 75 ohms
PB/B-Y: 0.7 Vp-p, 75 ohms
P
R
/R-Y: 0.7 Vp-p, 75 ohms
continued
General
Power requirements
Area code Power requirements
U, CA 120 V AC, 60 Hz
Power consumption
Area code Power consumption
U 230 W
CA 315 VA
Power consumption (during standby mode)
0.3 W
Dimensions 16 7/8 × 6 2/8 × 12 1/8
inches (430 × 157.5 ×
308.5 mm) including
projecting parts and
controls
Mass (Approx.) 16 lb 13 oz (7.6 kg)
Speaker section
SS-MSP95 for front and surround speakers
SS-CNP95 for center speaker
Speaker system Full range, magnetically
shielded
Speaker units 70 mm × 100 mm cone
type
Enclosure type Bass reflex
Rated Impedance 8 ohms
Power handling capacity (Maximum input
power)
120 W
Sensitivity level 86 dB (1 W, 1 m)
Frequency range 160 Hz – 20,000 Hz
Dimensions (w/h/d)
SS-MSP95
Approx.
10 2/8 × 4 × 5 2/8
inches (260 × 101.7 ×
133 mm)
SS-CNP95
Approx.
4 × 6 6/8 × 5 2/8
inches (101.7 × 169.7 ×
133 mm)
Mass
SS-MSP95 1 lb 16 oz (0.9 kg)
SS-CNP95 2 lb 7 oz (1.1 kg)