Filter
Top Products
Amplifier Operation
masterpage:Right
lename[E:\SEM_Janet\Revision2_STR-
D
B795\J9040000_2148931122DB795CEL\2148931122\GB04BSC_STR-DB795-CEL.fm]
27
GB
model name1[STR-DB795]
[2-148-931-12(2)]
A SW: Lights up when sub woofer selection is
set to “YES” (page 17). While this indicator
lights up, the receiver outputs the LFE signal
recorded on the disc or generates a low
frequency signal for output to the sub woofer.
This indicator does not light during the 2CH
STEREO mode.
B LFE: Lights up when the disc being played
back contains the LFE (Low Frequency
Effect) channel and the LFE channel signal is
actually being reproduced.
C SP A/SP B: Lights up in accordance with the
speaker system being used (A or B). Turns off
when speaker output is turned off or when
headphones are connected.
D ; DIGITAL EX: Lights up when the receiver
is decoding signals recorded in the Dolby
Digital format.
E ; PRO LOGIC IIx: “; PRO LOGIC”
lights up when the receiver applies Pro Logic
processing to 2 channel signals in order to
output the center and surround channel
signals. “; PRO LOGIC II” lights up when
the Pro Logic II Movie/Music/Game decoder
is activated. “; PRO LOGIC IIx” lights up
when the Pro Logic IIx Movie/Music/Game
decoder is activated. However, these
indicators do not light up if both the center and
surround speakers are set to “NO” and you
select a sound field using the A.F.D. button.
Note
Dolby Pro Logic IIx decoding does not function
for DTS format signals and for signals with a
sampling frequency of more than 48 kHz.
F DTS-ES 96/24: “DTS” lights up when DTS
signals are input. “DTS-ES” lights up when
DTS-ES signals are input. “DTS 96/24” lights
up when the receiver is decoding DTS 96 kHz/
24 bit signals.
Note
When playing a DTS format disc, be sure that you
have made digital connections and that INPUT
MODE is not set to “ANALOG” (page 35).
G NEO:6: Lights up when DTS Neo:6 cinema/
music mode decoding is activated.
H Tuner indicators: Lights up when using the
receiver to tune in radio stations, etc. See
pages 22–25 for tuner operations.
I DIRECT: Lights up when the ANALOG
DIRECT function is activated.
J EQ: Lights up when the equalizer is activated.
K D.RANGE: Lights up when dynamic range
compression is activated (page 40).
L COAX: Lights up when the source signal is a
digital signal being input through the
COAXIAL terminal.
M OPT: Lights up when the source signal is a
digital signal being input through the
OPTICAL terminal.
N SLEEP: Lights up when sleep timer is
activated.
About the indications in the display
MEMORY
DIRECT
L C R
SL S SR
SBRSBL
SB
SW
LFE
SP A
SP B
RDS
STEREO MONOD.RANGE EQ
NEO:6
SLEEP OPT COAX 96/24
DIGITAL EX
;
PRO LOGIC IIx DTS-ES
;
qa 9q;
qf
qg
qsqd
2143567 8
continued