Filter
Top Products
66
US
Using a digital satellite
receiver or other components
with a high audio output level
Connect the satellite receiver to the VIDEO/
SAT jacks on the rear panel. You can also
connect the components with a high audio
output level (including 2V r.m.s components,
such as MD, etc.) to the VIDEO/SAT jacks, and
perform the following to prevent distortion
occurring.
1 Press FUNCTION repeatedly until
“VIDEO” appears in the front panel
display.
2 Press AMP MENU.
3 Press X/x repeatedly until
“ATTENUATE” appears in the front
panel display, then press ENTER or c.
4 Press X/x to select “ATT ON” in the
front panel display.
The output level is changed.
When you select “ATT OFF” and press x,
this operation will be canceled.
5 Press ENTER or AMP MENU.
The AMP menu turns off.
The function name in the front panel
display changes to “SAT.”
• To return to the VIDEO function, select “ATT OFF”
at Step 4.
Presetting radio stations
You can preset 20 FM stations, and 10 AM
stations. Before tuning, make sure to turn down
the volume to minimum.
1 Press FUNCTION repeatedly until the
band you want appears in the front
panel display.
2 Press and hold TUNING + or – until the
auto scanning starts.
Scanning stops when the system tunes in a
station. “TUNED” and “ST” (for stereo
program) appear in the front panel display.
3 Press TUNER MENU.
4 Press C/X/x/c repeatedly until
“MEMORY” appears in the front panel
display.
5 Press ENTER.
A preset number appears in the front panel
display.
Tip
Enjoying the Radio
TUNER
MENU
CLEAR
TUNING –/+
C/X/x/c
ENTER
FUNCTION
PRESET
–/+
VOLUME +/
–
TUNER/
BAND